|
|
Personal Details
|
|
| Name | Dr Pavan Gurrala |
| Designation | Associate Professor |
| Department | Mechanical, School of Technology |
| Email | Pavan.Gurrala@sot.pdpu.ac.in |
|
|
Educational Qualifications
|
| Ph.D (Additive Manufacturing, BITS Pilani), 2015 |
| M.E. (Design Engineering, BITS Pilani), 2006 |
| B.Tech. (Mechanical, Sri Venkateswara), 2002 |
|
|
Professional Affiliation
|
| ASME,
Institution of Engineers |
|
|
Awards
|
| INSA fellowship to attend international conference in Malaysia.
|
|
|
|
Publications / Articles / Conference
|
| Articles/Chapters Published in the books |
| 'NanoScintillators: Need, Present and Future', National Institute for Aerospace Research (INCAS) Bulletin, Dec 2023 |
|
| Published Papers in Journals |
| 'Synthesis of Cerium-doped Gadolinium Gallium Aluminum Garnet (GGAG:Ce) Scintillating Powder via Solvothermal Method', Physica Scripta, pp. 0-0, Mar 2024, DOI : 10.1088/1402-4896/ad30e2 |
| 'Finite element studies on Triply Periodic Minimal Surfaces (TPMS)–based hip replacement implants', The International Journal of Advanced Manufacturing Technology, pp. 0-15, Jun 2024, DOI : https://doi.org/10.1007/s00170-024-13963-4 |
| 'Novel Synthesis of radioluminescent CsI:Tl microcrystals under ambient conditions by antisolvent recrystallization method', Optical Materials, pp. 1-9, Feb 2024, DOI : https://doi.org/10.1016/j.optmat.2023.114759. |
| '3D printed microcrystalline CsI:Tl composite scintillating thin films for X-ray imaging', Radiation Measurements, pp. 1073011-7, Sep 2024, DOI : https://doi.org/10.1016/j.radmeas.2024.107301 |
| 'MoS 2 Nanostructures for Solar Hydrogen Generation via Membraneless Electrochemical Water Splitting', ACS Applied Electronics, pp. 1461-1470, Mar 2023, DOI : https://doi.org/10.1021/acsaelm.2c01415 |
| 'Conversion of waste polystyrene into valuable aromatic hydrocarbons via microwave‑assisted pyrolysis', Environmental Science and Pollution Research, pp. 1-14, Jun 2023, DOI : https://doi.org/10.1007/s11356-023-28294-2 |
| 'MoS2 Nanostructures for Solar Hydrogen Generation via Membraneless Electrochemical Water SplittingSSING SLUDGE USING RECOVERABLE NANOCATALYST', Applied Electronic Materials, pp. 1461 -1470, Apr 2023, DOI : https://doi.org/10.1021/acsaelm.2c01415 |
| 'Conversion of waste polystyrene into valuable aromatic hydrocarbons via microwave-assisted pyrolysis', Environmental Science and Pollution Research , pp. 1-14, Jun 2023, DOI : https://doi.org/10.1007/s11356-023-28294-2 |
| 'Investigations on the effect of orientations on mechanical properties in fused filament fabrication parts using numerical model', The Brazilian Society of Mechanical Sciences and Engineering, Mar 2022, DOI : https://doi.org/10.1007/s40430-022-03422-0 |
| 'Investigation on electroless metallized fused filament fabricated ABS parts', Materials and Manufacturing Process, Dec 2022, DOI : https://doi.org/10.1080/10426914.2022.2157427 |
| 'Transient thermal finite-element analysis of fused filament fabrication process', Rapid Prototyping Journal, Dec 2021 |
| 'Fuzzy logic based expert system for prediction of tensile strength in Fused Filament Fabrication (FFF) process', Materials Today: Proceedings, Jan 2021 |
| 'Finite element analysis of fused filament extrusion build part using different build orientation', Materials Today: Proceedings, Nov 2020 |
| 'Numerical simulation of polymers at low and moderate strain rates', Materials Today: Proceedings, Dec 2020 |
| 'Parametric Study on Surface Roughness of Metallized Parts Manufactured by Additive Manufacturing', Key Engineering Materials, Sep 2019 |
| 'Influence of temperature on polymer parts manufactured by fused deposition modeling process', Journal of the Brazilian Society of Mechanical Sciences and Engineering, Feb 2019 |
| 'Design and Manufacturing of Nasal Conformer', Materials Science Forum, Nov 2018 |
| 'Friction and wear rate characteristics of parts manufactured by fused deposition modelling process', Int. J. Rapid Manufacturing, Vol. 6, No. 4, 2017, Apr 2017 |
| 'Multi-objective optimization of strength and volumetric shrinkage of FDM parts', Virtual and Physical Prototyping, Mar 2014 |
| 'DOE based parametric study of volumetric change of FDM parts', Procedia Materials Science, Jul 2014 |
| 'Part Strength Evolution with Bonding between Filaments in FDM', Virtual and Physical Prototyping, Mar 2014 |
| 'Optimization of support material and build time in fused deposition modeling (FDM)', Applied Mechanics and Materials, Jul 2012 |
|
| Full Papers in Conference Proceedings |
| 'Multiphysics Modelling and Simulation of Hydrogel Membrane for Water Desalination', , pp. 249-265, Oct 2023, DOI : https://doi.org/10.1007/978-981-99-5613-5_20 |
| 'To Study the Influence of Temperature on Strength during Free Form Fabrication (FFF)', 1st International Conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN 2019), Sep 2019 |
|
| Papers presented in Conferences, Seminars, Workshops, Symposia |
| 'Fabrication of Scintillator Thin Films via Controlled Deposition of CsI:Tl Microcrystals for Enhanced Radiation Detection', DAE-Solid State Physics Symposium 2023, Dec 2023 |
| 'Multiphysics Modelling and Simulation of Hydrogel Membrane for Water Desalination', Advances in Mechanical Engineering and Material Science,, apr 2023 |
| 'To study the influence of temperature on strength during free form fabrication (FFF)', 1st International Conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN 2019), Sep 2019 |
| 'Parametric Study to Predict the Bond Formation in FDM Process', 8th International Conference on Material and Manufacturing Technology (ICMMT 2017), May 2017 |
| 'Design and Analysis of an Innovative Nozzle', 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), Dec 2016 |
| 'Friction and Wear Behavior of ABS Polymer Parts made by Fused Deposition Modeling (FDM)', International Conference on Advances of Tribology, Feb 2014 |
| 'Prediction of Neck Growth due to Inter and Intra-Layer Bonding for High Strength Parts in Additive Manufacturing', 4th International & 25thAll India Manufacturing Technology, Design & Research Conference, Dec 2012 |
| 'Optimization of Support Material and Build Time in Fused Deposition Modeling (FDM) using Central Composite Design Methodology', 26thInternational Conference of CAD / CAM, Robotics & Factories of Future, Jul 2011 |
|
|
|